4 AWG XHHW-2 – COPPER

XHHW-2 cables are primarily used for power distribution in
conduit or other recognized raceways as specified in the
National Electrical Code. The cables may be used in wet or dry
locations with conductor temperatures not exceeding 90°C and
may be used in free air, raceways, or cable trays in accordance
with National Electrical Code. Voltage rating for XHHW-2 cable
is 600V or 1000V. XHHW-2电缆主要用于配电 中规定的导管或其他认可的电缆管道 国家电气规范。电缆可以在潮湿或干燥的环境中使用 导体温度不超过90℃的位置,以及 可用于自由空气、电缆管道或电缆槽 符合国家电气规范。XHHW-2电缆的额定电压 是600V还是1000V。

Get a Quote 获取报价

XHHW-2 cables are primarily used for power distribution inconduit or other recognized raceways as specified in theNational Electrical Code. The cables may be used in wet or drylocations with conductor temperatures not exceeding 90°C andmay be used in free air, raceways, or cable trays in accordancewith National Electrical Code. Voltage rating for XHHW-2 cableis 600V or 1000V. XHHW-2电缆主要用于配电中规定的导管或其他认可的电缆管道国家电气规范。电缆可以在潮湿或干燥的环境中使用导体温度不超过90℃的位置,以及可用于自由空气、电缆管道或电缆槽符合国家电气规范。XHHW-2电缆的额定电压是600V还是1000V。

BWC-4XHHW

UL 44
UL Listed as Type XHHW-2
“FOR CT USE” on 1/0 AWG and larger
Requirements of the National Electrical Code
ICEA S-95-658/NEMA WC-70
Federal Specification A-A-59544
UL 1685 Flame Rated: CT Use (1/0 AWG and larger available
upon request)
Temperature Rated at 90°C Wet/Dry, Cold bend and cold
impact at -25°C
Sunlight Resistant, Gasoline and Oil Resistant II
Sunlight-resistant for 8 AWG and larger, black only
OSHA Acceptable
Made in china
UL 44
UL被列为XHHW-2型
1/0 AWG及以上规格的“用于CT”
国家电气规范的要求
ICEA S-95-658/NEMA WC-70
联邦规范A-A-59544
UL 1685火焰等级:CT使用(1/0 AWG或更大)
应要求)
额定温度为90°C湿/干、冷弯曲和冷
-25°C时的影响
耐阳光、耐汽油和耐油II
8 AWG及更大规格的耐日光,仅黑色
OSHA可接受
中国制造

Compressed soft drawn bare copper with class B stranded per ASTM B8
符合 ASTM B8 的 B 级绞合压缩软拉裸铜

Abrasion, heat, moisture, and flame resistant cross-linked
耐磨、耐热、防潮和阻燃交联
polyethylene (XLP) insulation. Low coefficient of friction,
聚乙烯 (XLP) 绝缘。低摩擦系数 /
“slippery” or “slick” material
“光滑”或“光滑”材料